{"title":"Simplex","description":null,"products":[{"product_id":"simplex-2098-9806","title":"SIMPLEX 2098-9806 Remote Test Station","description":"\u003cp\u003eThe \u003cstrong\u003eSimplex 2098-9806\u003c\/strong\u003e is a remote test station for Simplex TrueAlarm duct smoke sensor housings. It lets a technician trigger a duct detector test from outside the air handler, instead of climbing to the housing itself.\u003c\/p\u003e\n\u003cp\u003eFirst, the test station mounts on a standard single-gang electrical box. Then a stainless steel cover plate gives it a clean, vandal-resistant finish. As a result, the device fits comfortably at eye level in a corridor or mechanical room.\u003c\/p\u003e\n\u003cp\u003eTwo indicators are built into the plate. Specifically, a red LED reports the duct detector’s status — solid when the duct detector is in alarm. In addition, a key-operated switch on the same plate initiates the alarm test. Therefore, only authorized personnel with the matching key can run the test.\u003c\/p\u003e\n\u003ch3\u003eHow the Simplex 2098-9806 Works\u003c\/h3\u003e\n\u003cp\u003eThe 2098-9806 wires to the test and LED terminals on a compatible Simplex duct detector housing. Turning the key switch to TEST initiates an alarm on that duct detector. As a result, the building’s fire alarm panel and dependent HVAC shutdown logic exercise exactly as they would in a real smoke event. Furthermore, the red LED confirms the duct detector status at a glance.\u003c\/p\u003e\n\u003ch3\u003eCompatible Duct Sensor Housings\u003c\/h3\u003e\n\u003cp\u003eThe 2098-9806 is intended for the Simplex 4098-9755 (2-wire) and 4098-9756 (4-wire) TrueAlarm duct sensor housings. In addition, it works with the legacy 4098-9685, 4098-9686, and 4098-9688 duct housings on the same wiring scheme.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKey-operated test switch — initiates a real alarm on the duct detector\u003c\/li\u003e\n\u003cli\u003eRed LED status indicator visible from the corridor\u003c\/li\u003e\n\u003cli\u003eSingle-gang stainless steel cover plate\u003c\/li\u003e\n\u003cli\u003ePolarized, color-coded wiring to the duct sensor housing\u003c\/li\u003e\n\u003cli\u003eAllows duct detector testing without ladder access to the housing\u003c\/li\u003e\n\u003cli\u003eGenuine Simplex part — preserves the duct detector’s system listing\u003c\/li\u003e\n\u003cli\u003eSimplex part number cross-reference: 0621151\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount in a standard single-gang electrical box\u003c\/li\u003e\n\u003cli\u003eWire to the test and remote LED terminals on the Simplex duct sensor housing\u003c\/li\u003e\n\u003cli\u003eObserve polarity — connections are color-coded\u003c\/li\u003e\n\u003cli\u003eMaximum wire length between the test station and the duct sensor housing: 250 ft\u003c\/li\u003e\n\u003cli\u003eAlways supply the building owner with the corresponding test-station key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SIMPLEX","offers":[{"title":"Default Title","offer_id":54082233696563,"sku":"2098-9806","price":34.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/9785\/1699\/files\/2098-9806.png?v=1790546977"},{"product_id":"simplex-2099-9754","title":"SIMPLEX 2099-9754 Pull Station","description":"\u003cp\u003eThe \u003cstrong\u003eSimplex 2099-9754\u003c\/strong\u003e is a conventional single-action manual pull station designed for use with conventional (non-addressable) fire alarm control panel circuits. Featuring a simple, intuitive single-pull activation mechanism, this pull station allows building occupants to manually initiate a fire alarm by pulling down on the handle — making it one of the most straightforward and reliable alarm activation devices in commercial fire protection. The red housing meets the visual identification requirements of NFPA 72 and ADA accessibility standards for manual alarm initiating devices.\u003c\/p\u003e\n\u003cp\u003eSingle-action pull stations are among the most commonly specified manual initiating devices for conventional fire alarm systems in schools, commercial offices, retail buildings, warehouses, and industrial facilities. The 2099-9754’s conventional wiring makes it simple to install on standard two-wire initiating device circuits (IDC), and the break-rod mechanism provides clear visual confirmation that the station has been activated. After any alarm activation, the pull station is reset using a key and a replacement break-rod (2099-9804, sold separately), ensuring the device returns to its tamper-evident, ready-to-operate state.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSingle-action activation: simple pull-down operation — no twist or push required\u003c\/li\u003e\n\u003cli\u003eConventional (non-addressable) two-wire IDC wiring — compatible with conventional FACP zones\u003c\/li\u003e\n\u003cli\u003eRed housing with high-visibility “FIRE — PULL DOWN” labeling per NFPA 72\u003c\/li\u003e\n\u003cli\u003eBreak-rod tamper evidence: broken rod provides visual confirmation of activation\u003c\/li\u003e\n\u003cli\u003eKey-reset mechanism — prevents unauthorized reset without authorized access\u003c\/li\u003e\n\u003cli\u003eWeather-resistant construction suitable for interior commercial applications\u003c\/li\u003e\n\u003cli\u003eADA-compliant mounting height and activation force when properly installed\u003c\/li\u003e\n\u003cli\u003eUL 38 listed (Manually Actuated Signaling Boxes)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Single-action, conventional manual pull station\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit Type:\u003c\/strong\u003e Conventional two-wire IDC (initiating device circuit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReset:\u003c\/strong\u003e Key reset with replacement break-rod (2099-9804)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e UL 38, NFPA 72\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Standard electrical box, surface or flush mount\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SIMPLEX","offers":[{"title":"Default Title","offer_id":54082233827635,"sku":"2099-9754","price":48.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/9785\/1699\/files\/2099-9754.png?v=1790725223"},{"product_id":"simplex-2975-9463","title":"SIMPLEX 2975-9463 SF Bracket","description":"\u003cp\u003eThe Simplex 2975-9463 is a 4606-9202 sf bracket, red for use in commercial fire alarm and life safety systems. As a genuine OEM replacement part, it is engineered to Simplex standards and integrates with Simplex 4100ES, 4010ES, 4020ES, TrueSite Workstation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer: Simplex\u003c\/li\u003e\n\u003cli\u003ePart Number: 2975-9463\u003c\/li\u003e\n\u003cli\u003ePart Type: Replacement Part\u003c\/li\u003e\n\u003cli\u003eCondition: New, genuine OEM\u003c\/li\u003e\n\u003cli\u003eApplication: Commercial fire alarm systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThe Simplex 2975-9463 is designed for use with Simplex 4100ES, 4010ES, 4020ES, TrueSite Workstation. Always verify compatibility with your specific system configuration and firmware version. Contact Life Safety Consultants for pre-sale technical assistance.\u003c\/p\u003e","brand":"SIMPLEX","offers":[{"title":"Default Title","offer_id":54082236481843,"sku":"2975-9463","price":94.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/9785\/1699\/files\/2975-9463.png?v=1790534852"},{"product_id":"simplex-4090-9001","title":"SIMPLEX 4090-9001 Individual Addressable Module (IAM)","description":"\u003cp\u003eThe \u003cstrong\u003eSimplex 4090-9001\u003c\/strong\u003e is an Individual Addressable Module (IAM). It monitors normally open dry contact inputs. Specifically, it brings non-addressable contact devices onto a Simplex IDNet or MAPNET II addressable loop.\u003c\/p\u003e\n\u003cp\u003eFirst, the module receives both power and data from a single two-wire IDNet or MAPNET II circuit. Then, it supervises the contact wiring out to an end-of-line resistor. As a result, the panel sees the exact device that changed state — not just a zone fault.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMonitors normally open, dry contact inputs\u003c\/li\u003e\n\u003cli\u003ePowered and supervised over a single IDNet or MAPNET II pair\u003c\/li\u003e\n\u003cli\u003eOne IDNet\/MAPNET address per module\u003c\/li\u003e\n\u003cli\u003eClass B supervised contact wiring\u003c\/li\u003e\n\u003cli\u003eUp to 500 ft (152 m) from IAM to end-of-line resistor\u003c\/li\u003e\n\u003cli\u003eUp to 400 ft when used with 2081-9044 overvoltage protectors\u003c\/li\u003e\n\u003cli\u003eVisible LED — flashes for communications, steady on alarm\u003c\/li\u003e\n\u003cli\u003eScrew terminals; thermoplastic enclosure minimizes dust ingress\u003c\/li\u003e\n\u003cli\u003eMounts in a standard single-gang electrical box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Control Panels\u003c\/h3\u003e\n\u003cp\u003eFor IDNet communications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimplex 4008, 4010, 4010ES, 4100U, and 4100ES\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor MAPNET II communications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimplex 4100, 4100U, 4100ES, 4120, 4020\u003c\/li\u003e\n\u003cli\u003eSimplex 2120 Communicating Device Transponders (CDTs)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SIMPLEX","offers":[{"title":"Default Title","offer_id":54082236809523,"sku":"4090-9001","price":28.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/9785\/1699\/files\/SIMPLEX4090-9001_2fe0d89b-bb81-41dc-8579-432c4e462583.png?v=1791415730"},{"product_id":"simplex-4090-9002","title":"SIMPLEX 4090-9002 Individual Addressable Module","description":"\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cb\u003eSimplex 4090-9002\u003c\/b\u003e\u003cspan\u003e is a compact Relay Individual Addressable Module (IAM) designed to deliver precise auxiliary control via an addressable IDNet communications channel. Providing a single Form C (SPDT) dry contact output, it enables compatible Simplex fire alarm control panels to automate critical emergency functions—such as HVAC shutdown, elevator capture, damper operation, and fan control. Because it draws both data and operating power directly from the IDNet loop, installation wiring is significantly streamlined. Built to fit standard 4-inch square electrical boxes, the sealed module features an integrated status LED for fast diagnostics, reports real-time relay state to the panel, and automatically defaults to an OFF state during power loss or communication failure for fail-safe reliability. \u003c\/span\u003e\u003c\/p\u003e","brand":"SIMPLEX","offers":[{"title":"Default Title","offer_id":54082236973363,"sku":"4090-9002","price":63.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/9785\/1699\/files\/4090-9002.jpg?v=1790530063"},{"product_id":"simplex-4090-9051","title":"SIMPLEX 4090-9051 Addressable Relay Module","description":"\u003cp class=\"p1\"\u003e\u003cb\u003eSimplex 4090-9051 Addressable Control Relay Module\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eThe Simplex 4090-9051 is an addressable control relay module designed to provide efficient control and monitoring of auxiliary fire alarm system functions. This compact, high-performance module seamlessly integrates with Simplex fire alarm panels, allowing for precise activation of external devices such as door releases, fans, or notification appliances.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eKey Features:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eAddressable communication\u003c\/b\u003e\u003c\/span\u003e – Provides reliable status reporting and activation tracking.\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eCompact design\u003c\/b\u003e\u003c\/span\u003e – Small footprint allows for easy installation in various locations.\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eRemote-controlled operation\u003c\/b\u003e\u003c\/span\u003e – Enables activation of external devices for enhanced fire safety.\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eLED status indicator\u003c\/b\u003e\u003c\/span\u003e – Displays communication and operational status for quick troubleshooting.\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eUL-listed for compliance\u003c\/b\u003e\u003c\/span\u003e – Meets fire protection standards for reliable system integration.\u003c\/p\u003e","brand":"SIMPLEX","offers":[{"title":"Default Title","offer_id":54082237071667,"sku":"4090-9051","price":43.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/9785\/1699\/files\/4090-9051.png?v=1790547399"},{"product_id":"simplex-4098-5207","title":"SIMPLEX 4098-5207 5-Inch Sensor Base","description":"\u003cp class=\"p3\"\u003eThe \u003cstrong\u003eSimplex 4098-5207\u003c\/strong\u003e is a 5-inch standard sensor base designed for use with TrueAlarm addressable smoke and heat detectors. This base provides a secure and reliable mounting platform, ensuring proper electrical connections and stable performance within Simplex fire detection systems. It seamlessly integrates with compatible TrueAlarm detectors, allowing for easy installation and maintenance in commercial and industrial environments.\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cb\u003eKey Features:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eSecure mounting for TrueAlarm addressable detectors\u003c\/b\u003e\u003c\/span\u003e – Ensures a stable and reliable connection for smoke and heat sensors, enhancing overall fire detection performance.\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003e5-inch standard design for universal compatibility\u003c\/b\u003e\u003c\/span\u003e – Works seamlessly with compatible Simplex TrueAlarm detectors, making it easy to integrate into new or existing fire alarm systems.\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eEasy installation and maintenance\u003c\/b\u003e\u003c\/span\u003e – Designed for quick and hassle-free setup, allowing for efficient detector replacement and servicing.\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eDurable construction for long-lasting reliability\u003c\/b\u003e\u003c\/span\u003e – Built with high-quality materials to withstand environmental conditions and maintain dependable operation.\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eUL-listed and NFPA-compliant for fire safety\u003c\/b\u003e\u003c\/span\u003e – Meets strict industry standards, ensuring compliance with fire protection regulations.\u003c\/p\u003e","brand":"SIMPLEX","offers":[{"title":"Default Title","offer_id":54082237301043,"sku":"4098-5207","price":11.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/9785\/1699\/files\/4098-5207.png?v=1791494682"},{"product_id":"simplex-4098-9714","title":"SIMPLEX 4098-9714 Smoke Detector Head","description":"\u003cp class=\"p1\"\u003e\u003cb\u003eSimplex 4098-9714 Photoelectric Smoke Detector Head\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eThe Simplex 4098-9714 is a replacement photoelectric smoke detector head engineered for use in addressable fire alarm systems. It provides comprehensive 360° smoke entry and enhanced sensitivity, ensuring early detection of fire conditions in a wide range of commercial and industrial environments.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eKey Features:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e• \u003cspan class=\"s1\"\u003e\u003cb\u003e360° Smoke Entry:\u003c\/b\u003e\u003c\/span\u003e Designed to allow smoke to enter from all directions, offering faster and more accurate detection.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e• \u003cspan class=\"s1\"\u003e\u003cb\u003eAdjustable Sensitivity:\u003c\/b\u003e\u003c\/span\u003e Supports seven levels of sensitivity (from 0.2% to 3.7% per foot of smoke obscuration) configurable through the control panel.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e• \u003cspan class=\"s1\"\u003e\u003cb\u003eAdvanced Sensing:\u003c\/b\u003e\u003c\/span\u003e Photoelectric sensing technology ensures high performance in detecting smoldering fires.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e• \u003cspan class=\"s1\"\u003e\u003cb\u003eLED Status Indicator:\u003c\/b\u003e\u003c\/span\u003e Includes a visible LED for instant status feedback—flashes green when polling, steady red in alarm.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e• \u003cspan class=\"s1\"\u003e\u003cb\u003eTwo-Wire Communication:\u003c\/b\u003e\u003c\/span\u003e Utilizes IDNet or MAPNET II two-wire communications for efficient signal transmission.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e• \u003cspan class=\"s1\"\u003e\u003cb\u003eCompatibility:\u003c\/b\u003e\u003c\/span\u003e Works with Simplex 4098 series sensor bases and is compatible with Simplex addressable control panels.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e• \u003cspan class=\"s1\"\u003e\u003cb\u003eUL Listed:\u003c\/b\u003e\u003c\/span\u003e Meets industry standards for safety and performance.\u003c\/p\u003e","brand":"SIMPLEX","offers":[{"title":"Default Title","offer_id":54082237464883,"sku":"4098-9714","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/9785\/1699\/files\/photoelectric_smoke_detector_Simplex_4098-9714.webp?v=1790528748"},{"product_id":"simplex-4098-9773","title":"SIMPLEX 4098-9773 Detector Base","description":"\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong data-start=\"474\" data-end=\"525\"\u003eSimplex 4098-9773 Carbon Monoxide Detector Base\u003c\/strong\u003e\u003cspan\u003e provides a secure and dependable platform for mounting and connecting carbon monoxide detectors. Designed for compatibility with Simplex CO detection systems, this base ensures proper electrical connection, stable installation, and seamless integration into existing fire and life safety systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 data-start=\"824\" data-end=\"872\"\u003eSecure and Efficient CO Detector Installation\u003c\/h2\u003e\n\u003cp data-start=\"874\" data-end=\"1250\"\u003eThe Simplex 4098-9773 allows technicians to mount carbon monoxide detectors safely and reliably. Its standardized design ensures proper alignment and connectivity, minimizing installation errors and supporting consistent system performance. By providing a reliable foundation, this detector base helps maintain accurate CO monitoring and timely alerts in emergency situations.\u003c\/p\u003e\n\u003ch3\u003eWhy 520 Hz Matters\u003c\/h3\u003e\n\u003cp\u003eNFPA 72 calls for 520 Hz low-frequency signals in sleeping areas of new construction. Therefore, this base meets the low-frequency awakening requirement for hotels, dormitories, multi-family residential, and other sleeping-room occupancies.\u003c\/p\u003e","brand":"SIMPLEX","offers":[{"title":"Default Title","offer_id":54082237923635,"sku":"4098-9773","price":195.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/9785\/1699\/files\/Simplex-4098-9773-CO-Sensor-base-w-sounder-07431567.jpg?v=1790534314"},{"product_id":"simplex-4098-9789","title":"SIMPLEX 4098-9789 Sensor Base","description":"\u003cp class=\"p3\"\u003eThe \u003cstrong\u003eSimplex 4098-9789\u003c\/strong\u003e is a sensor base designed for use with Simplex TrueAlarm analog addressable sensors, including photoelectric and heat detectors. This base facilitates secure mounting and reliable communication between the sensor and the fire alarm control panel.\u003cspan class=\"Apple-converted-space\"\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eKey Features:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003cspan class=\"s2\"\u003e\u003cb\u003eWired Connections:\u003c\/b\u003e\u003c\/span\u003e Equipped with terminals for connecting to remote devices such as the 2098-9808 Remote LED alarm indicator or the 4098-9822 relay. Note that the 4098-9822 relay is unsupervised and requires a separate 24 VDC power supply.\u003cspan class=\"Apple-converted-space\"\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003cspan class=\"s2\"\u003e\u003cb\u003eIntegral Red LED:\u003c\/b\u003e\u003c\/span\u003e Features a built-in red LED that provides visual indication of the sensor’s status. The LED pulses to indicate normal operation and remains steady on to signal an alarm or trouble condition.\u003cspan class=\"Apple-converted-space\"\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003cspan class=\"s2\"\u003e\u003cb\u003eAddress Programming:\u003c\/b\u003e\u003c\/span\u003e Utilizes a DIP switch located under the sensor for setting the device’s address, ensuring accurate identification and communication within the system.\u003cspan class=\"Apple-converted-space\"\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003cspan class=\"s2\"\u003e\u003cb\u003eCompatibility:\u003c\/b\u003e\u003c\/span\u003e Designed to work seamlessly with Simplex TrueAlarm analog sensors, providing a reliable interface between the sensor and the fire alarm control unit.\u003c\/p\u003e","brand":"SIMPLEX","offers":[{"title":"Default Title","offer_id":54082238021939,"sku":"4098-9789","price":32.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/9785\/1699\/files\/4098-9789.png?v=1790534682"},{"product_id":"simplex-4098-9792","title":"SIMPLEX 4098-9792 Addressable Sensor Base","description":"\u003cp\u003eThe \u003cstrong\u003eSimplex 4098-9792\u003c\/strong\u003e Sensor Base is an addressable Standard Sensor Base. Therefore, compatible with a variety of TrueAlarm Detector Heads. Also, this sensor base contains essential addressable electronics, which constantly monitor the status of the adjustable photoelectric or heat sensors.\u003c\/p\u003e\n\u003cp\u003eSome of the main features and specifications are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEvery four seconds, each sensor’s output is transmitted to the fire alarm control panel.\u003c\/li\u003e\n\u003cli\u003eAutomatic identification provides default sensitivity when substituting sensor types.\u003c\/li\u003e\n\u003cli\u003eRed LED light for power-on (pulsing) or alarm or trouble (steady on).\u003c\/li\u003e\n\u003cli\u003eLocking anti-tamper design mounts on standard outlet box.\u003c\/li\u003e\n\u003cli\u003eMagnetically operated functional test.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn general, the Simplex 4098-9792 Sensor Base also allows intentional sensor substitution during building construction. Furthermore, when conditions are temporarily dusty, for instance, you don’t need to cover the smoke sensors, disabling them. In this case, heat sensors may be installed without the need to reprogram the control panel.\u003c\/p\u003e\n\u003cp\u003eEven if the control panel indicates an incorrect sensor type, the heat sensor will operate at a default sensitivity. As a result, you will have heat detection for building protection at that location. Therefore, compatible with Simplex fire alarm control panel models 4010, 4020, 4100, and 4120.\u003c\/p\u003e","brand":"SIMPLEX","offers":[{"title":"Default Title","offer_id":54082238153011,"sku":"4098-9792","price":40.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/9785\/1699\/files\/4098-9792.jpg?v=1790531083"},{"product_id":"simplex-4098-9794","title":"SIMPLEX 4098-9794 Photoelectric Heat Sensor","description":"\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eSimplex 4098-9794\u003c\/strong\u003e can be used with TrueAlarm Photoelectric and Heat Sensors. The sensor base comes with an alarm sounder, which provides a high output (88 dBA) with low current requirements (20mA). Meanwhile, the Simplex 4098-9794 details include power from 24 VDC or a compatible Notification Appliance Circuit (NAC) and the possibility of manual activation from the control panel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTimed\/Multi-Stage Selection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can program the alarm for timed sensitivity selection. Such as being more sensitive at night and less sensitive during the day. Besides, the control panel can provide a multi-stage operation per sensor. For example, while a 0.2% level may generate a warning a 2.5% level may initiate the alarm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSensor Alarm and Trouble LED Indication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach sensor base’s LED pulses to indicate communications with the panel. If the control panel determines that a sensor is in alarm, for example, that sensor base’s LED will be turned on steadily. The same happens when there is dirt inside the base or any other type of trouble. During a system alarm, the control panel will control the LEDs such that an LED indicating trouble will return to pulsing to help identify the alarmed sensors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \/ Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDigital communication via IDNet or MAPNET II.\u003c\/li\u003e\n\u003cli\u003eThe control panel processes sensor information to determine sensor status.\u003c\/li\u003e\n\u003cli\u003eSensor and sounder operation is on the UL Standard 268 list.\u003c\/li\u003e\n\u003cli\u003eSounder operation is also on UL Standard 464 list, as an audible notification appliance.\u003c\/li\u003e\n\u003cli\u003eIt is designed for EMI compatibility.\u003c\/li\u003e\n\u003cli\u003eIt comes with a magnetic test feature.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SIMPLEX","offers":[{"title":"Default Title","offer_id":54082238316851,"sku":"4098-9794","price":52.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/9785\/1699\/files\/4098-9794.png?v=1790529164"},{"product_id":"simplex-4099-9006","title":"SIMPLEX 4099-9006 Addressable Pull Station","description":"\u003cp\u003eThe \u003cstrong\u003eSimplex 4099-9006\u003c\/strong\u003e Pull Station addressable manual station combines the familiar Simplex manual station housing with a compact communication module that is easily installed to satisfy demanding applications. Its integral individual addressable module (IAM) constantly monitors the status and communicates changes to the connected control panel communications wiring. Activation of the 4099-9004 single-action manual station requires a firm downward pull to activate the alarm switch. Completing the action breaks an internal plastic break-rod (visible below the pull lever, use is optional). The Simplex 4099-9006 Pull Station P\/N:06501211 uses a break-rod that can be a deterrent to vandalism without interfering with the minimum pull requirements needed for easy activation. Also, the pull lever latches into the alarm position and remains extended out of the housing to provide a visible indication.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSome of the features we describe below, for example:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVisible LED indicator that flashes during communications and is on steady when the station has been activated\u003c\/li\u003e\n\u003cli\u003ePull the lever that protrudes when alarmed\u003c\/li\u003e\n\u003cli\u003eBreak-rod supplied (use is optional)\u003c\/li\u003e\n\u003cli\u003eModels are available with a single or double action (break-glass or push) operation\u003c\/li\u003e\n\u003cli\u003ePower and data supplied via IDNet or MAPNET II addressable communications using a single wire pair\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SIMPLEX","offers":[{"title":"Default Title","offer_id":54082238546227,"sku":"4099-9006","price":62.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/9785\/1699\/files\/4099-9006.jpg?v=1790095416"},{"product_id":"simplex-4100-1255","title":"SIMPLEX 4100-1255 Interface Module","description":"\u003cp\u003eThe \u003cstrong\u003eSimplex 4100-1255\u003c\/strong\u003e is a 3-8 channel audio interface module for 4100ES and 4100U panels.\u003c\/p\u003e\n\u003cp\u003eIt serves the panel’s emergency voice and alarm communication system. Specifically, it routes voice messages, alarm tones, and prerecorded audio to speaker circuits. As a result, occupants receive clear evacuation signaling during a fire or other emergency.\u003c\/p\u003e\n\u003ch3\u003eSimplex 4100-1255 channel capacity\u003c\/h3\u003e\n\u003cp\u003eThe module supports 8 channels of normal-resolution messages. Alternatively, it handles 4 channels of high-resolution audio. In addition, evacuation signals can start automatically from alarm event programs. Firefighters can also trigger them manually from the operator controls.\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eThe 4100-1255 is a flat module. Therefore, it mounts in the panel bay without a switch face. However, adjacent LED\/switch modules are required to select specific speaker circuits.\u003c\/p\u003e","brand":"SIMPLEX","offers":[{"title":"Default Title","offer_id":54082238873907,"sku":"4100-1255","price":104.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/9785\/1699\/files\/4100-1255.png?v=1790094605"},{"product_id":"simplex-4906-9127","title":"SIMPLEX 4906-9127 Wall Horn","description":"\u003cp\u003eThe \u003cstrong\u003eSimplex 4906-9127\u003c\/strong\u003e wall horn strobe provides convenient installation to standard electrical boxes. The enclosure designs are both impact and vandal resistant and provide a convenient strobe intensity selection. Since each Simplex 4906-9127 model can be selected for strobe intensity output, on-site model inventory is minimized and changes encountered during construction can be easily accommodated.\u003c\/p\u003e\n\u003cp\u003eIn fact, wall mount A\/V housings are a one-piece assembly (including lens) that mounts to a single or double gang, or 4” square standard electrical box. Also, the covers can be quickly removed (a tool is required). The covers are available separately for color conversion. Besides, ceiling mounts A\/Vs install using standard 4” electrical boxes. The color choice comes determined by the model number.\u003c\/p\u003e\n\u003cp\u003eMultiple Strobes. When multiple strobes and their reflections can be seen from one location, synchronized flashes reduce the probability of photo-sensitive reactions as well as the annoyance and possible distraction of random flashing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \/ Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperation is compatible with ADA requirements\u003c\/li\u003e\n\u003cli\u003eRugged, high impact, flame retardant thermoplastic housings are available in red or white with a clear lens\u003c\/li\u003e\n\u003cli\u003eHorns that come controlled separately from strobes on the same two-wire circuit\u003c\/li\u003e\n\u003cli\u003eSmartSync horn activation of Temporal pattern, March Time pattern (at 60 BPM), or on continuously\u003c\/li\u003e\n\u003cli\u003eStrobe appliances on the same circuit operating at a synchronized 1 Hz flash rate\u003c\/li\u003e\n\u003cli\u003eWiring terminals are accessible from the front of the housing providing easy access for installation, inspection, as well as testing\u003c\/li\u003e\n\u003cli\u003eCovers are available separately to convert housing color\u003c\/li\u003e\n\u003cli\u003e24 VDC xenon strobe; intensity is selectable as 15, 30, 75, or 110 Candela with visible selection jumper secured behind strobe housing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SIMPLEX","offers":[{"title":"Default Title","offer_id":54082240151859,"sku":"4906-9127","price":76.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/9785\/1699\/files\/4906-9127.png?v=1790093421"},{"product_id":"simplex-4906-9131","title":"SIMPLEX 4906-9131 Weatherproof Multi-Candela Horn","description":"\u003cp\u003eThe \u003cstrong\u003eSimplex 4906-9131\u003c\/strong\u003e is a weatherproof TrueAlert multi-candela horn strobe in a red enclosure. It combines audible and visible fire alarm notification in a single device rated for outdoor and wet or damp locations. As a result, the 4906-9131 fits parking garages, loading docks, building exteriors, and other harsh environments.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e4906-9131\u003c\/strong\u003e uses a SmartSync-compatible two-wire 24 VDC notification appliance circuit. In addition, the strobe output is field-selectable at 15, 30, 75, or 110 candela. Therefore, one part number covers a wide range of coverage requirements without stocking multiple SKUs.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWeatherproof red enclosure rated for wet and damp locations\u003c\/li\u003e\n\u003cli\u003eSmartSync two-wire NAC operation at 24 VDC\u003c\/li\u003e\n\u003cli\u003eField-selectable strobe output: 15, 30, 75, or 110 cd\u003c\/li\u003e\n\u003cli\u003eCombined audible horn and visible strobe in a single device\u003c\/li\u003e\n\u003cli\u003eStandard fire-alarm red finish for clear identification\u003c\/li\u003e\n\u003cli\u003ePart of the Simplex TrueAlert notification alliance family\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Multi-candela horn strobe, weatherproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrobe candela settings:\u003c\/strong\u003e 15, 30, 75, 110 cd (field-selectable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNAC:\u003c\/strong\u003e SmartSync two-wire, 24 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironment:\u003c\/strong\u003e Outdoor \/ wet \/ damp locations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SIMPLEX","offers":[{"title":"Default Title","offer_id":54082240381235,"sku":"4906-9131","price":105.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/9785\/1699\/files\/4906-9131_1_edited.jpg?v=1790092955"},{"product_id":"simplex-49ao-wrf","title":"SIMPLEX 49AO-WRF Addressable Audible Horn","description":"\u003cp\u003e\u003cstrong\u003eTrueAlert ES addressable horns\u003c\/strong\u003e – individually addressed audible notification appliances. That receives power, supervision, and control signals from a Simplex fire alarm control panel. Providing IDNAC\u003cbr\u003eSignaling Line Circuits (SLCs). The use of Self-Test and Magnet Test features improves installation efficiency. TrueAlert device reports conveniently identify information about each connected appliance.\u003c\/p\u003e\n\u003cp\u003eWith the Self-Test feature, appliance operation can – confirmed without leaving the control panel.\u003c\/p\u003e\n\u003cp\u003eSelecting Self-Test Mode from the control panel allows on-board sensors, to detect their own strobe and\/or horn output. Operation – by selected VNAC appliance groups.\u003c\/p\u003e\n\u003cp\u003eIn this test mode, in response to the application of a magnet. The appliance LED pulses sequentially to conveniently indicate the appliance’s address. Operational Appliance Magnet Test\u003cbr\u003eIn this test mode, after the address – indicated by pulsing the appliance LED. The horn will briefly sound to indicate proper operation.\u003c\/p\u003e","brand":"SIMPLEX","offers":[{"title":"Default Title","offer_id":54082240479539,"sku":"49AO-WRF","price":62.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/9785\/1699\/files\/49AO-WRF-SIMPLEX-768x768.png?v=1790091944"},{"product_id":"simplex-49av-wrf","title":"SIMPLEX 49AV-WRF Wall-Mounted Strobe","description":"\u003cp class=\"p1\"\u003e\u003cb\u003eSimplex 49AV-WRF Wall-Mount Red Horn\/Strobe\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eThe Simplex 49AV-WRF is a high-performance, wall-mounted red horn\/strobe designed to provide both audible and visual fire alarm notification. Engineered for reliability in commercial and industrial environments, this notification appliance ensures effective emergency alerting, improving occupant response times and overall safety.\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cb\u003eKey Features:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eLoud and clear horn output for effective emergency alerting\u003c\/b\u003e\u003c\/span\u003e – Produces a strong audible signal designed to cut through background noise, ensuring that alarms are heard in high-traffic areas.\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eBright, multi-candela strobe for enhanced visibility\u003c\/b\u003e\u003c\/span\u003e – Selectable candela settings (ranging from 15 to 110 cd) provide flexibility to match different room sizes and visibility requirements, ensuring clear visual alerts for all occupants.\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eWeather-resistant construction for versatile indoor\/outdoor use\u003c\/b\u003e\u003c\/span\u003e – Designed to withstand environmental conditions, making it suitable for both indoor and covered outdoor applications.\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eSynchronized operation for consistent signaling\u003c\/b\u003e\u003c\/span\u003e – Works seamlessly with fire alarm control panels to synchronize horn and strobe activation across multiple units, reducing confusion during an emergency.\u003c\/p\u003e\n\u003cp class=\"p5\"\u003e\u003cspan class=\"Apple-tab-span\"\u003e\u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cb\u003eUL-listed and NFPA-compliant for fire safety\u003c\/b\u003e\u003c\/span\u003e – Meets stringent fire safety standards, ensuring dependable operation in critical situations.\u003c\/p\u003e","brand":"SIMPLEX","offers":[{"title":"Default Title","offer_id":54082240577843,"sku":"49AV-WRF","price":96.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/9785\/1699\/files\/49av-wrf.webp?v=1789957096"},{"product_id":"simplex-49svc-wrfire","title":"SIMPLEX 49SVC-WRFIRE Protective Cover","description":"\u003cp\u003eA wall-mounted protective cover for Simplex speaker-strobe notification appliances, featuring bold red color with prominent white \"FIRE\" lettering for high visibility during emergencies.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eKey Features:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003e• \u003cb\u003eHigh Visibility Design:\u003c\/b\u003e Red color with white \"FIRE\" text ensures clear identification in any lighting condition\u003c\/p\u003e\n\u003cp\u003e• \u003cb\u003eImpact-Resistant:\u003c\/b\u003e Durable plastic construction protects appliances from dust, debris, and unintended contact\u003c\/p\u003e\n\u003cp\u003e• \u003cb\u003eWall Mount:\u003c\/b\u003e Compatible with Simplex SV series speaker-strobe devices\u003c\/p\u003e\n\u003cp\u003e• \u003cb\u003eTampering Deterrent:\u003c\/b\u003e Enclosed design discourages accidental or intentional interference with fire alarm equipment\u003c\/p\u003e\n\u003cp\u003e• \u003cb\u003eEasy Installation:\u003c\/b\u003e Compatible with standard 4-inch square USA electrical boxes\u003c\/p\u003e","brand":"SIMPLEX","offers":[{"title":"Default Title","offer_id":54082240708915,"sku":"49SVC-WRFIRE","price":10.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/9785\/1699\/files\/49svc-wrfire.webp?v=1789956971"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/9785\/1699\/collections\/Simplex_Logo.png?v=1789952640","url":"https:\/\/plenasupply.com\/collections\/simplex.oembed","provider":"Plena Supply","version":"1.0","type":"link"}