EDWARDS KIR-PCD Smoke and Monoxide Detector

Edwards KIR-PCD Smoke and Monoxide Detector

General limitations of CO detectors
This detector – designed to protect individuals from the acute effects of CO exposure. It will not fully safeguard individuals with specific medical conditions.
Replace the detector every ten years from the date of manufacture.
A detector installed outside a bedroom may not awaken a sleeper.
If the distance or closed or partly closed doors muffle the sounder.
CO detectors – not a substitute for life safety. They should only – considered an integral part of a comprehensive safety program.

Selecting a suitable location is critical to the operation of CO detectors. Install detectors according to applicable codes and standards.
On the ceiling in the same room as permanently installed fuel-burning appliances.
In any area required by local building codes, legislation, or the AHJ
In a suitable environment per the detector specifications.
On a firm, permanent surface.

Do not install the CO detector:
• Within 5 ft. (1.5 m) of any cooking appliance
• Within 10 ft. (3 m) of a fuel-burning appliance
• Near air conditioners, heating registers, or any other ventilation
source that may interfere with CO gas entering the detector
• Where furniture or draperies may obstruct the airflow
• In a recessed area