FIRE-LITE BEAM355 Intelligent Addressable Reflected Beam Smoke Detector
Only 7 available
Manufacturer warranty
Fire-Lite warranty
Term 36 months from date of manufacture
Fire-Lite products are covered by Honeywell's Fire Products Standard Limited Warranty against defects in materials and workmanship. Products are date-stamped at manufacture. Software, batteries and other consumables are not covered. Honeywell repairs, replaces or credits defective units through its RMA process.
RMA help from Plena Supply
Need a return or replacement under warranty? Contact Plena Supply with your order number and the item's serial/date code, and we'll guide you through the RMA process.
Warranty terms are set by the manufacturer and can vary by product, date code and purchase channel.
The FIRE-LITE BEAM355 is an intelligent, addressable, single-ended reflected-type beam smoke detector for protecting open areas with high and sloping ceilings and wide-open areas where spot-type smoke detectors are difficult to install and maintain. Typical applications are atriums, cathedral ceilings, aircraft hangars, warehouses, sporting arenas, concert halls and enclosed parking facilities. It is compatible with the Fire-Lite MS-9600 Series and MS-9200 Series panels in LiteSpeed® or CLIP mode.
The BEAM355 is a transmitter/receiver unit and a reflector. When smoke enters the area between the unit and the reflector, it reduces the signal strength; when the level reaches the selected threshold, an alarm is activated. Single-ended reflective design installs much faster than a dual-ended projected beam, and alignment is simplified by an optical gunsight and a two-digit signal strength display.
Key Features
- Listed to UL 268 and CAN/ULC S529
- Transmitter and receiver built into the same unit
- Six selectable sensitivity levels, including two Acclimate® self-adjusting settings
- 16 to 230 ft (5 to 70 m) protection range; 230 to 328 ft (70 to 100 m) with optional BEAMLRK kit
- Built-in automatic gain control compensates for signal deterioration from dust buildup
- Removable plug-in terminal blocks; digital display, no special tools required
- Local alarm test and reset switches; remote test/reset with RTS151 or RTS151KEY
- Optional BEAMMMK multi-mount kit, BEAMHK / BEAMHKR heater kits; paintable cover
- Listed for operation from -22°F to 131°F
- Manufacturer: Fire-Lite Alarms | Part Number: BEAM355 | Condition: New
Always verify compatibility with your system and local code requirements before ordering.
Technical Specifications
Manufacturer: Fire-Lite Alarms (Honeywell)
Model: BEAM355 (BEAM355S adds an integral sensitivity test filter)
Protection Range: 16 to 230 ft (5 to 70 m); 230 to 328 ft (70 to 100 m) with BEAMLRK
Adjustment Angle: ±10° horizontal and vertical
Sensitivity: Level 1 25%, Level 2 30%, Level 3 40%, Level 4 50%, Acclimate 30–50%, Acclimate 40–50% obscuration
Voltage: 15 to 32 VDC
Average Standby Current (24 VDC): 2 mA maximum
Alarm Current: 8.5 mA maximum; Trouble 4.5 mA maximum; Alignment 20 mA maximum
Remote Alarm Output: 15 to 32 VDC, 6–15 mA
Temperature: -22°F to 131°F (-30°C to 55°C)
Humidity: 10% to 93% RH non-condensing
Detector Dimensions: 10.0" H × 7.5" W × 3.3" D (254 × 191 × 84 mm)
Reflector (16–230 ft): 7.9" × 9.1" (200 × 230 mm)
Shipping Weight: 3.7 lb (1.68 kg)