NOTIFIER AMPS-24 Addressable Power Supply and Battery Charger, 24 VDC, 120 VAC
Only 3 available
Manufacturer warranty
Notifier warranty
Term 36 months from date of manufacture
Notifier products are covered by Honeywell's Fire Products Standard Limited Warranty against defects in materials and workmanship. Products are date-stamped at manufacture. Software, batteries and other consumables are not covered. Honeywell repairs, replaces or credits defective units through its RMA process.
RMA help from Plena Supply
Need a return or replacement under warranty? Contact Plena Supply with your order number and the item's serial/date code, and we'll guide you through the RMA process.
Warranty terms are set by the manufacturer and can vary by product, date code and purchase channel.
The NOTIFIER AMPS-24 is an addressable power supply and battery charger with up to three 24 VDC outputs. It operates in either FlashScan® or CLIP (Classic Loop Interface Protocol) mode with the NFS-3030/NFS2-3030 fire alarm control panel, and can also be used as the primary power supply for the NCA-2 Network Control Annunciator.
Key Features
- Addressable by the NFS-3030/NFS2-3030 FACP; isolated Signaling Line Circuit (SLC) interface
- Selectable charging current (1.0 A, 2.0 A or 5.0 A) charges 7 AH to 200 AH sealed lead-acid batteries
- Main 24 V output: filtered, power-limited, up to 5 A (see configuration table)
- Secondary power auxiliary outputs: 24 V @ 0.5 A and 5 V @ 0.15 A
- Trouble bus input for normally open dry contacts or open-collector circuits
- USB Type B connector for programming installation parameters
- Brownout detection; AC loss detection and AC loss delay reporting; battery/charger supervision
- Mounts in a CAB-4 Series enclosure, EQ Cabinet Series enclosure, or BB-25, BB-100 or BB-200 battery backbox
- Manufacturer: Notifier | Part Number: AMPS-24 | Condition: New
Output Configuration (Main 24 V / Total AUX 24 V maximum current)
- 1 A charger, 7–26 AH batteries: 5 A / 3 A
- 2 A charger, 12–60 AH batteries: 5 A / 3 A
- 5 A charger, 55–200 AH batteries: configuration 1 5 A / 0 A; configuration 2 3 A / 1 A
- Charger disabled: 5 A / 5 A
Always verify compatibility with your system and local code requirements before ordering.
Technical Specifications
Manufacturer: Notifier (Honeywell)
Model: AMPS-24 (120 VAC; AMPS-24E is the 220–240 VAC version)
Primary (AC) Power: 110–120 VAC, 50/60 Hz, 5 A maximum
Outputs: up to three 24 VDC outputs (main and auxiliary), filtered and power-limited
Battery Charger: current-limited, sealed lead-acid, 7 to 200 AH; 1.0 A, 2.0 A or 5.0 A selectable
Wire Sizes: 10 AWG (5.26 mm²) to 22 AWG (0.326 mm²)
Battery Fuse (F2): 15 A, fast-acting
Shipping Weight: 4.25 lb
Listings: UL S635; ULC CS118; CSFM 7165-0028:224; FM Approved; MEA 345-02-E; FDNY #6026; City of Chicago; City of Denver