NOTIFIER B200S-LF-IV Intelligent Low-Frequency 520 Hz Sounder Base, Ivory
In stock — ships within 1 business day via FedEx
Manufacturer warranty
Notifier warranty
Term 36 months from date of manufacture
Notifier products are covered by Honeywell's Fire Products Standard Limited Warranty against defects in materials and workmanship. Products are date-stamped at manufacture. Software, batteries and other consumables are not covered. Honeywell repairs, replaces or credits defective units through its RMA process.
RMA help from Plena Supply
Need a return or replacement under warranty? Contact Plena Supply with your order number and the item's serial/date code, and we'll guide you through the RMA process.
Warranty terms are set by the manufacturer and can vary by product, date code and purchase channel.
The NOTIFIER B200S-LF-IV is an ivory, intelligent, programmable low-frequency sounder base. It produces a fundamental frequency of 520 Hz ±10% with a square wave or its equivalent, designed to meet the NFPA 72 requirement (effective January 1, 2014) for audible appliances in sleeping areas. Studies have shown that low-frequency tones around 520 Hz are more effective at waking sleeping occupants.
The B200S-LF adopts the same address as the detector installed in it, and the panel can command each sounder — or a group of sounders — to activate. It supports ANSI Temporal 3 for fire, Temporal 4 for CO (with compatible CO detectors), continuous, March Time and custom tones, and recognizes the System Sensor synchronization protocol when connected to a compatible power supply or NAC output. In addition to the SLC, the base requires 24 VDC constant power or a NAC circuit, depending on the panel and intended use.
Key Features
- 520 Hz low-frequency square-wave tone for sleeping areas per NFPA 72
- Programmable high or low volume
- ANSI Temporal 3, Temporal 4, continuous, March Time and custom tone patterns
- Uses FlashScan® protocol; shares the address of the installed detector
- Synchronizes with System Sensor notification appliances as part of the general evacuation signal
- Isolated 24 V constant/NAC power and communication connections
- Meets UL 268 and UL 464 (Temporal 4 meets UL 268 and UL 2075)
- Ivory; white version is B200S-LF-WH
- Manufacturer: Notifier | Part Number: B200S-LF-IV | Condition: New
Detector head sold separately. Not compatible with remote-test-capable 200 series detectors. Always verify compatibility with your system and local code requirements before ordering.
Technical Specifications
Manufacturer: Notifier (Honeywell) / System Sensor
Model: B200S-LF-IV
Base Diameter: 6.875" (17.46 cm)
Base Height (less sensor): 2.0" (5.08 cm)
Weight: 0.6 lb (272 g)
External Supply Voltage: 16 to 33 VDC (VFWR)
Standby Current: 550 µA maximum
Alarm Current, High Volume: 70 mA max @ 33 VDC; 90 mA max @ 24 VDC; 140 mA max @ 16 VDC
Alarm Current, Low Volume: 15 mA max @ 33 VDC; 20 mA max @ 24 VDC; 25 mA max @ 16 VDC
SLC Operating Voltage: 15 to 32 VDC
Sound Output: greater than 85 dBA (high) / 75 dBA (low) minimum, UL reverberant room at 10 ft, 24 V
Operating Humidity: 10% to 93% RH non-condensing