NOTIFIER FZM-1 Zone Interface Module

NOTIFIER FZM-1 Zone Interface Module

$100.66
Skip to product information
NOTIFIER FZM-1 Zone Interface Module

NOTIFIER FZM-1 Zone Interface Module

$100.66

Only 8 available

Ships In 1 Business Day Via FedEx
30-Day Returns
Need 20+ units? Request a quote →

Notifier FZM-1 — FlashScan intelligent addressable interface module for a zone of two-wire conventional smoke detectors.

The FZM-1 lets a Notifier intelligent panel monitor and power one full zone of compatible two-wire, 24 V smoke detectors and report its status (normal, open or alarm) back to the panel. It takes one module address on the SLC, set with built-in rotary switches, and it can replace MMX-2 modules in existing systems. A flashing LED shows communication with the panel and latches steady on alarm.

  • Monitored circuit: Class B (Style B) or Class A (Style D); 3.9K ohm EOL resistor provided; maximum IDC loop resistance 25 ohms
  • Addressing: 01 to 159 on FlashScan loops, 01 to 99 on CLIP loops
  • Operating voltage: 15 to 32 VDC; 5.1 mA maximum (LED on); 270 µA average
  • External supply: 24 VDC power-limited, 0.1 Vrms maximum ripple, 90 mA per module maximum
  • 32 to 120°F; 10% to 93% humidity, noncondensing
  • 4.5" H × 4" W × 1.25" D; mounts to a 4" square × 2-1/8" deep box or the SMB500 surface-mount box

All two-wire detectors on the zone must be listed as compatible with the FZM-1. The SMB500 surface-mount box is available separately.

You may also like