BOGEN TEL1S Telephone Interface Input Module
Only 1 available
Manufacturer warranty
Bogen warranty
Term 2 years from date of sale for most products
Most Bogen products are warranted against defects in material and workmanship for two years from the date of sale to the original purchaser. Some product lines (certain speakers, amplifiers, microphones and cables) carry different periods.
RMA help from Plena Supply
Need a return or replacement under warranty? Contact Plena Supply with your order number and the item's serial/date code, and we'll guide you through the RMA process.
Warranty terms are set by the manufacturer and can vary by product, date code and purchase channel.
The Bogen TEL1S is a telephone interface input module for Bogen modular amplifier/mixer systems. It has a transformer-isolated, balanced input and configuration jumpers that allow it to interface with both wet and dry loop telephone systems: in dry loop mode it connects to page ports, and in wet mode it connects to ground start and loop start trunks.
Key Features
- Loop start or ground start trunk interfacing (requires external 48V DC talk battery supply)
- Dry loop interface to paging ports with audio-activated paging
- Transformer-isolated, balanced input
- Gain/Trim control and limiter
- Noise gate with threshold and duration controls
- Mute send and receive; 4 priority levels; bus assignable
- Manufacturer: Bogen | Part Number: TEL1S | Condition: New
Compatibility
Plug-in module for Bogen amplifiers and mixers that accept Bogen advanced input modules (e.g. Gold Seal and Power Vector series).
Always verify compatibility with your system and local code requirements before ordering.
Technical Specifications
Manufacturer: Bogen Communications
Model: TEL1S
Gain: 0 dB to 30 dB
Frequency Response: +0/-3 dB, 20 Hz - 20 kHz
S/N: -90 dBV @ 30 dB of gain; -120 dBV EIN
Distortion: < 0.1%, 20 Hz - 20 kHz
Input Impedance: Dry loop 30k ohms; wet loop 1k ohms
Limit Threshold: -10 dBV to off
Gate Threshold: 3 mV to 30 mV
Gate Duration: 0.5 s to 5 s
Priority: Four levels
External Power: 48V DC (for talk battery)
Input Connection: 6-pin screw terminal barrier strip