NOTIFIER FDM-1 Dual Monitor Module
Only 8 available
Manufacturer warranty
Notifier warranty
Term 36 months from date of manufacture
Notifier products are covered by Honeywell's Fire Products Standard Limited Warranty against defects in materials and workmanship. Products are date-stamped at manufacture. Software, batteries and other consumables are not covered. Honeywell repairs, replaces or credits defective units through its RMA process.
RMA help from Plena Supply
Need a return or replacement under warranty? Contact Plena Supply with your order number and the item's serial/date code, and we'll guide you through the RMA process.
Warranty terms are set by the manufacturer and can vary by product, date code and purchase channel.
Notifier FDM-1 — FlashScan intelligent addressable dual monitor module with two independent Class B input circuits.
The FDM-1 gives a Notifier intelligent panel two separate two-wire initiating device circuits from one module, at two consecutive SLC addresses. Monitor L responds at the address set on the rotary switches, and Monitor H automatically takes the next higher address. It monitors normally open fire alarm and supervisory contacts, or normally open or normally closed security devices, which makes it a space-saver wherever two contact devices sit side by side.
- Inputs: two independent Class B (Style B) initiating device circuits; do not mix fire alarm, supervisory and security devices on the same circuit
- Operating voltage: 15 to 32 VDC from the SLC
- Current: 6.4 mA maximum (LED on); 750 µA average (LED flashing)
- Maximum SLC wiring resistance 40 ohms; maximum IDC wiring resistance 1,500 ohms; 47K ohm EOL resistors
- Maximum IDC voltage 11 V; maximum IDC current 240 µA
- 32 to 120°F; 10% to 93% humidity, noncondensing
- 4.675" H × 4.275" W × 1.4" D; mounts to a 4" square box at least 2-1/8" deep
For Class A input wiring, use FMM-1 monitor modules instead. The SMB500 surface-mount box is available separately.