NOTIFIER FDM-1 Dual Monitor Module

NOTIFIER FDM-1 Dual Monitor Module

$128.91
Skip to product information
NOTIFIER FDM-1 Dual Monitor Module

NOTIFIER FDM-1 Dual Monitor Module

$128.91

Only 8 available

Ships In 1 Business Day Via FedEx
30-Day Returns
Need 20+ units? Request a quote →

Notifier FDM-1 — FlashScan intelligent addressable dual monitor module with two independent Class B input circuits.

The FDM-1 gives a Notifier intelligent panel two separate two-wire initiating device circuits from one module, at two consecutive SLC addresses. Monitor L responds at the address set on the rotary switches, and Monitor H automatically takes the next higher address. It monitors normally open fire alarm and supervisory contacts, or normally open or normally closed security devices, which makes it a space-saver wherever two contact devices sit side by side.

  • Inputs: two independent Class B (Style B) initiating device circuits; do not mix fire alarm, supervisory and security devices on the same circuit
  • Operating voltage: 15 to 32 VDC from the SLC
  • Current: 6.4 mA maximum (LED on); 750 µA average (LED flashing)
  • Maximum SLC wiring resistance 40 ohms; maximum IDC wiring resistance 1,500 ohms; 47K ohm EOL resistors
  • Maximum IDC voltage 11 V; maximum IDC current 240 µA
  • 32 to 120°F; 10% to 93% humidity, noncondensing
  • 4.675" H × 4.275" W × 1.4" D; mounts to a 4" square box at least 2-1/8" deep

For Class A input wiring, use FMM-1 monitor modules instead. The SMB500 surface-mount box is available separately.

You may also like