NOTIFIER FDRM-1 FlashScan Dual Relay / Dual Monitor Module
Only 11 available
Manufacturer warranty
Notifier warranty
Term 36 months from date of manufacture
Notifier products are covered by Honeywell's Fire Products Standard Limited Warranty against defects in materials and workmanship. Products are date-stamped at manufacture. Software, batteries and other consumables are not covered. Honeywell repairs, replaces or credits defective units through its RMA process.
RMA help from Plena Supply
Need a return or replacement under warranty? Contact Plena Supply with your order number and the item's serial/date code, and we'll guide you through the RMA process.
Warranty terms are set by the manufacturer and can vary by product, date code and purchase channel.
The NOTIFIER FDRM-1 is a FlashScan® multi output-input module for Notifier ONYX® and CLIP series fire alarm control panels. Intended for intelligent two-wire SLC loops, it combines two individual relay control modules and two Class B monitor modules in one device.
Each relay output is intended for Form C switching applications that do not require wiring supervision for the load circuit; each monitor input interfaces the panel with one or more normally open contact-type devices. Each relay output has its own green LED, and each monitored input has its own bi-color LED controlled by the panel.
Key Features
- Two Form C relay outputs and two Class B (Style B) monitor inputs in one module
- Powered directly by the SLC loop, no external power required
- Rotary decimal addressing (1–99 on CLIP systems, 1–159 on FlashScan systems); uses up to four addresses
- DIP switches can disable relay output #2 or monitored input #2 to free addresses
- Addresses can be viewed and changed without electronic programmers
- Integral LEDs flash green in normal operation (programmable) and latch steady red for alarm
- Addressable-analog communication; sleek low-profile design
- Mounts to a standard 4" square, 2-1/8" deep junction box; surface-mount box available
- Manufacturer: Notifier | Part Number: FDRM-1 | Condition: New
Note: inputs and outputs provide Class B (Style B) circuits only; Class A (Style D) is not supported. Always verify compatibility with your system and local code requirements before ordering.
Technical Specifications
Manufacturer: Notifier (Honeywell)
Model: FDRM-1 (FDRM-1A is the ULC model)
Normal Operating Voltage: 15 to 32 VDC
Maximum Current Draw: 24 mA (4 LEDs on)
Relay Contact Ratings: 3 A @ 30 VDC resistive (non-coded); 2 A @ 30 VDC resistive (coded); 2 A @ 25 VAC PF 0.35; 0.46 A @ 30 VDC L/R 20 ms; 0.7 A @ 70.7 VAC PF 0.35; 0.9 A @ 125 VDC resistive; 0.5 A @ 125 VAC PF 0.75; 0.3 A @ 125 VAC PF 0.35
Operating Temperature: 32°F to 120°F (0°C to 49°C)
Relative Humidity: 10% to 93% non-condensing
Size: 4.675" H × 4.275" W × 1.4" D
Shipping Weight: 6.3 oz (178.6 g)
Listings: UL/ULC S635; CSFM 7300-0028:0219