NOTIFIER FSP-951-BP Addressable Photoelectric Smoke Detector, Bulk Pack of 10
Only 4 available
Manufacturer warranty
Notifier warranty
Term 36 months from date of manufacture
Notifier products are covered by Honeywell's Fire Products Standard Limited Warranty against defects in materials and workmanship. Products are date-stamped at manufacture. Software, batteries and other consumables are not covered. Honeywell repairs, replaces or credits defective units through its RMA process.
RMA help from Plena Supply
Need a return or replacement under warranty? Contact Plena Supply with your order number and the item's serial/date code, and we'll guide you through the RMA process.
Warranty terms are set by the manufacturer and can vary by product, date code and purchase channel.
The Notifier FSP-951-BP is a bulk pack of ten FSP-951 intelligent plug-in photoelectric smoke detectors (white). The FSP-951 Series is a direct replacement for the FSP-851 Series, with a modern low-profile design and an enhanced optical sensing chamber engineered to sense smoke from a wide range of combustion sources. Sensitivity is programmed and continuously monitored by the control panel, and rotary decimal address switches give each detector exact Point ID location.
Key Features
- Bulk pack of 10 FSP-951 photoelectric detectors
- Two-wire SLC loop connection; unit uses separate base for wiring
- Compatible with FlashScan® and CLIP protocol systems
- Rotary, decimal addressing
- Sleek, low-profile design with built-in tamper resistant feature
- Remote test from the panel; built-in magnet-activated functional test switch
- Walk test with address display (FlashScan systems)
- Removable cover and insect-resistant screen for field cleaning
- Factory preset at 1.5% nominal sensitivity; designed to meet UL 268 7th Edition
- Manufacturer: NOTIFIER | Part Number: FSP-951-BP | Condition: New
Compatibility
For NOTIFIER intelligent fire alarm control panels using FlashScan or CLIP protocol (refer to the NOTIFIER panel manuals for device capacity). Plugs into separately ordered B300-6 series (6.1 in.) or B501 series (4 in.) bases, or relay, isolator and sounder bases (see DN-60981).
Always verify compatibility with your system and local code requirements before ordering.
Technical Specifications
Manufacturer: NOTIFIER by Honeywell
Model: FSP-951-BP (10 x FSP-951)
Type: Intelligent addressable photoelectric smoke detector
Sensitivity: UL: 0.5% to 4.0% per foot obscuration
Size: 2.0 in. (51 mm) high; base determines diameter
Shipping Weight: 3.4 oz (95 g) per detector
Operating Temperature: 32°F to 122°F (0°C to 50°C)
Listed Velocity Range: 0-4000 ft/min, suitable for installation in ducts
Relative Humidity: 10% to 93% non-condensing
Voltage Range: 15-32 VDC peak
Standby Current: 200 µA max. avg. @ 24 VDC
Max Current: 4.5 mA @ 24 VDC (LED on)
Listings: UL/ULC S1115; FM Approved; CSFM 7272-0028:0503