NOTIFIER SCS-8 Smoke Control Station Master Module, 8 Switch Groups
Only 4 available
Manufacturer warranty
Notifier warranty
Term 36 months from date of manufacture
Notifier products are covered by Honeywell's Fire Products Standard Limited Warranty against defects in materials and workmanship. Products are date-stamped at manufacture. Software, batteries and other consumables are not covered. Honeywell repairs, replaces or credits defective units through its RMA process.
RMA help from Plena Supply
Need a return or replacement under warranty? Contact Plena Supply with your order number and the item's serial/date code, and we'll guide you through the RMA process.
Warranty terms are set by the manufacturer and can vary by product, date code and purchase channel.
The NOTIFIER SCS-8 is the Smoke Control Master Module of the SCS Series Smoke Control Stations. It is used with the Notifier NFS2-3030 panel or the NCA-2 Network Control Annunciator for Firefighter's Smoke Control Station (FSCS) applications, and with the NFS-320, NFS2-640, NFS2-3030 and NCA-2 for HVAC applications.
Each SCS-8 controls and monitors eight switch groups that control fans or dampers, or groups of fans or dampers, through intelligent control and monitor modules on the panel's SLC. One SCE-8 Smoke Control Expander adds eight more switch groups (16 total on one annunciator address). Communication to the SCS is over a two-wire EIA-485 serial interface (Annunciator Control System circuit); power is provided by a separate 24 VDC regulated power loop, and loss of power produces a trouble signal at the control panel.
Key Features
- Eight independent switch groups, each with a miniature locking three-position ON/AUTO/OFF (OPEN/AUTO/CLOSED) toggle switch
- Per switch group: ON/OPEN indicator (green), OFF/CLOSED indicator (yellow) and Trouble LED (amber); four annunciator protocol points (two control, two monitor)
- ALL AUTO LED (green), MANUAL LED (amber) and LOCAL ACKNOWLEDGE/LAMP TEST momentary switch
- Two modes of operation: Firefighter's Smoke Control Station (FSCS) or HVAC
- FSCS options: redundant smoke control stations, pairing, and adjustable trouble timers
- Two rotary decimal address switches and eight mode-configuration DIP switches
- Up to 32 annunciator addresses per Notifier system, for up to 512 switch groups
- Mounts in an ABS-4D annunciator surface box or on an ADP-4B annunciator dress panel in a CAB-4 Series cabinet (does not mount in a DP-DISP)
- Manufacturer: Notifier | Part Number: SCS-8 | Condition: New
Note: the HVAC mode is not consistent with UL and NFPA standards for smoke control and should be used for fan shutdown and HVAC purposes only. For full FSCS support with an NFS2-640, the SCS must connect to the NCA(-2) EIA-485 port. Always verify compatibility with your system and local code requirements before ordering.
Technical Specifications
Manufacturer: Notifier (Honeywell)
Model: SCS-8
Series: SCS Series Smoke Control Station
Switch Groups: 8 (16 with SCE-8 expander)
Communication: EIA-485 (Annunciator Control System circuit)
Power: separate 24 VDC regulated power loop
Environment: 32°F to 120°F (0°C to 49°C); 85% RH at 86°F per NFPA, 93% ±2% RH at 89.6°F per ULC (non-condensing)
Listings: UL S5511, S635, S4977; ULC S635, S4977; CSFM 7300-0028:183, 7165-0554:0149, 7165-0554:0153; MEA 289-91-E8; FDNY COA #6211, #6212, #6135, #6220